TM-m30II Series Firmware Updater Software

Version Ver. 02.15-03.19 ESC/POS
Uploaded date 2023/03/20
File size 141,637KB
Explanation The Firmware Updater allows you to update the firmware of the printer. However, depending on the usage environment, the update may cause malfunction of the printer. Please contact your dealer or system integrator to make sure that there is no problem with the update.

1.Note
  • 1.The software will update the printer's firmware.
    Depending on the usage environment, firmware update might cause faulty printer operations.
    Before updating the firmware, please confirm with the printer seller or SI and others if there is no problem to update it.

  • 2.The package consists of the following versions of the software :
    - Ver. 02.15 ESC/POS: TM-m30II
    - Ver. 03.19 ESC/POS: TM-m30II-H, TM-m30II-NT, TM-m30II-S, and TM-m30II-SL

2.Environment
  • [Support OS]
  • - Windows 11
  • - Windows 10 (32/64 bit)

  • [Support interface]
  • - USB2.0/3.0 (USB3.0 is supported in the environment for Windows 8 or later)
  • - Wired/Wireless LAN
  • - Bluetooth

  • [Other requirements]
  • - Administrator account is required.

3.Supported Products
  • [Support Model]
  • - TM-m30II
  • - TM-m30II-H
  • - TM-m30II-NT
  • - TM-m30II-S
  • - TM-m30II-SL

4.Changes from the Current Version
  • [End of Support OSes]
  • - End of support for Windows 8 and Windows 8.1.

  • [New function]
  • - The models have complied with the UK’s PSTI bill.

    • [For TM-m30II]

  • The RF regulation for OT-WL06 EKL (5GHz) is adapted from this version.
    Regions where OT-WL06 can support ('*' is newly added). EAI(NA), EEB(CE)/EHK, EHC, EAL, ECC, EAI(LA), EKL/ESP/EPIL, EEB(CISMEA), *EKL(5GHz)



    [For TM-m30II]
    Added a function in ePOS-Print to support the change in specifications (change in the initial setting value) of Private Network Access starting with Chrome 105.


  • [Bug fix]
  • - Fixed a bug where no new lines were created when executing the ESC J 0 command by enabling the Batch rotate print.

    • - Fixed a bug where line spacing increases when ESC J is executed in the "Batch rotate print (Upside Down)" function.



    [For TM-m30II-H,TM-m30II-NT,TM-m30II-S,TM-m30II-SL]
    Fixed a bug that prevented printing from another terminal after controlling DM-D70.



    [For TM-m30II-H,TM-m30II-NT,TM-m30II-S,TM-m30II-SL]
    Fixed a bug where a printer error occurs when all the following conditions are met, and the subsequent printing cannot be done:
    1. The OS version on the iOS device is iOS15 or later and the USB port type on the iOS device is USB-C port.
    2. Network tethering is enabled.
    3. The printer and the iOS device are connected via Lightning cable after the printer becomes Idle (after Network initialization is completed).



    [For TM-m30II-H,TM-m30II-NT,TM-m30II-S,TM-m30II-SL]
    Fixed a bug where a printer error occurs when all the following conditions are met, and the subsequent printing cannot be done:
    1. Network tethering is enabled.
    2. The printer and the iOS device are connected via Lightning cable after the printer becomes Idle (after Network initialization is completed).



    [For TM-m30II-H,TM-m30II-NT,TM-m30II-S,TM-m30II-SL]
    Fixed a bug where a printer error occurs when all the following conditions are met, and the subsequent printing cannot be done:
    1. The OS version on the iOS device is iOS15 or later.
    2. Network tethering is enabled.



    [For Windows operating systems]
    • In the [Download] box at the bottom of this page, select a target version, then click on the Download button.
    • A package that contains an executable file and the firmware data will be downloaded.

    [For Android / iOS operating systems]
    • Firmware can not be updated for TM Utility Ver.3.6.0 and earlier. Please upgrade to TM Utility Ver.3.7.0 or later.
    • With TM Utility Ver.3.7.0 or later, user management, password, access code are unnecessary.

    • Use the Firmware Update function of the TM Utility to update the firmwar

Notes on downloading

IMPORTANT!
BEFORE DOWNLOADING SOFTWARE, DOCUMENT OR OTHER CONTENTS ON THIS WEBSITE (the “Software”), YOU NEED TO REVIEW AND AGREE TO THE TERMS AND CONDITIONS SET FORTH BELOW, AND YOU MUST FOLLOW THE TERMS AND CONDITIONS WHEN YOU USE THE SOFTWARE.

  • Please review and agree to the license agreement, README or other documents that the Software contains carefully before Installing or using the Software.
  • You agree to use the Software only with the corresponding Epson brand products.
  • You acknowledge and agree that the use of the Software is at your sole risk. THE SOFTWARE IS PROVIDED "AS IS" AND WITHOUT ANY WARRANTY OF ANY KIND. EPSON AND ITS SUPPLIERS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE.
  • You agree not to modify, adapt or translate the Software and further agree not to attempt to reverse engineer, decompile, disassemble or otherwise attempt to discover the source code of the Software.
  • You agree that the Software will not be shipped, transferred or exported into any country or used in any manner prohibited by the applicable export laws, restrictions or regulations.

    • Download

    TM-m30II Series Firmware Updater    Ver. 02.15-03.19 ESC/POS

    File Name:
    TM-m30II_Series_Firmware_Updater_Ver.02.15-03.19.zip
    File size:
    141,637KB

    Jump to the top